Gigabyte GA-8GEM800 User Manual page 62

繁
6. 系統開機之後，按Del鍵進入BIOS選單並移動光棒到Load Fail-Safe Defaults選項且按Enter
來載入BIOS預設值。在BIOS更新之後，系統在正常情況下會重新去偵測所有週邊裝置；因
體
此，我們建議您在更新完BIOS之後，要重新載入BIOS預設值。
中
}
Standard CMOS Features
文
}
Advanced BIOS Features
}
Integrated Peripherals
}
Power Management Setup
}
PnP/PCI Configurations
}
PC Health Status
}
MB Intelligent Tweaker(M.I.T.)
ESC: Quit
F8: Dual BIOS/Q-Flash
7. 請選擇Save & Exit Setup儲存設定到CMOS並離開BIOS選單，離開BIOS選單之後，系統將
會重新開機。整個更新程序即完成。
}
Standard CMOS Features
}
Advanced BIOS Features
}
Integrated Peripherals
}
Power Management Setup
}
PnP/PCI Configurations
}
PC Health Status
}
MB Intelligent Tweaker(M.I.T.)
ESC: Quit
F8: Dual BIOS/Q-Flash
第二部份：在單 BIOS 主機板上使用 Q-Flash
這部分將指導您如何使用 Q-Flash 更新單顆 BIOS 主機板的 BIOS。
}
Standard CMOS Features
}
Advanced BIOS Features
}
Integrated Peripherals
}
Power Management Setup
}
PnP/PCI Configurations
}
PC Health Status
}
MB Intelligent Tweaker(M.I.T.)
ESC: Quit
F8: Q-Flash
GA-8GEM800 主機板
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Load Fail-Safe Defaults (Y/N)? Y
Time, Date, Hard Disk Type...
請按 Y鍵載入預設值
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Save to CMOS and EXIT (Y/N)? Y
Time, Date, Hard Disk Type...
請按Y鍵儲存設定並且離開
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Time, Date, Hard Disk Type...
- 62 -
Select Language
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
F3: Change Language
F10: Save & Exit Setup
Select Language
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
F3: Change Language
F10: Save & Exit Setup
更新 BIOS
TM
Top Performance
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
F3: Change Language
F10: Save & Exit Setup