Page 1
RANGE & OVER THE RANGE MICROWAVE DISPLAY #FP501419 Assembly Instructions Before beginning, please read through all the assembly instructions carefully. PARTS LISTS 600715 Left Hand Side Frame 600716 Right Hand Side Frame 600717 Header Assembly 600718 Steel Back Support 700543...
Page 2
Locate the left side frame, the steel back support, Step 1 and 4 of the 1/4-20 x 2" phillips truss head screws. Begin assembly by laying the back support and the left frame out as shown (figure 1) Align the holes in the steel back support with the Step 2 through holes in the side frame and insert the screws.
Page 3
Step 7 Carefully stand the unit up to finish installation. (figure 8) Step 8 Use the two #8 x 1/2" pan head screws to finish the attachment of the header assembly to the frames. (Figure 9) Step 9 Peel one side of the 3/4" x 3" double sided tape and attach it to the steel back support as shown. The tape should be placed within the graphic area below where the microwave will set and above where the range will be.