[Filter]; [Test Pattern] - NEC PE506UL User Manual

Expand
Language
Auto setup
Keystone
Security
Power management
Filter
Test pattern
Network setup
Control ID
Factory default

[Filter]

Set this function to reset the filter usage time and set up warning display.
1) Press ▲ ▼ button to select [Filter] menu.
2) Press the ENTER button.
3) Press ▲ ▼ button to switch required item.
When the projector reaches the user-set cleaning time, filter warning icon will appear on the screen to notify the user
to clean the projector filter. Reset the filter counter after cleaning it and filter warning icon will be closed.
Fliter counter......Displays the filter usage time.
Timer......Set the time to display a warning icon.
Filter counter reset......Reset filter counter.
NOTE:
• The screen will display the icon "Filter warning! Please change the filter! " when the projector has checks one warning. And the the warn-
ing icon will disappear 30 seconds later atuomatically, while only the Power button is effective during that period. The projector will give
warning again if the projector has checked filter block and will record the information.
Expand
Language
Auto setup
Keystone
Security
Power management
Filter
Test pattern
Network setup
Control ID
Factory default
Filter counter reset?
Yes
： Move
ENTER

[Test pattern]

Select this function to display the projector's built-in test pattern.
1) Press ▲ ▼ button to select [Test pattern] menu.
2) Press the ENTER button.
3) Press ▲ ▼ button to switch required item.
. . .
. . .
No
： Select ： Back
EXIT
Expand
Power management
Ready
Shut down
Off
Timer
Ready countdown
Expand
Filter counter
Timer
Filter counter reset
Filter warning
53
5. Using On-Screen Menu
5 Min
5 Min
Remaining time before
power off the light source.
Filter
5H
1000H
No signal
0 1 : 2 0