IB/100N/GE/4_9
4/12/02 10:17 AM
How to find your TV's Video Input Channel
In order to see what's playing on your DVD Player, you need to tune the TV to the Video Input Channel that corresponds to
the jacks you used to hook up the recorder to the TV. The Video Input Channel(s) varies for different brands and different
models of TVs. Below are some things to try.
• Consult the Owner's Manual that came with your TV.
• If you can't find the information in the manual, or can't find the manual, review the following list of ways to access Video
Input Channels on TVs.
• There might be a button on the TV's remote control that accesses the Video Input Channel (see table below for examples).
• You might select the Video Input Channel from the TV's menu system.
• You might tune to it by pressing a specific channel number (see table below)
• Press the Channel up and/or down buttons on the TV's remote control (sometimes the Video Input Channel is stored in
the channel list).
Video Input Channel Variations
Button/Switch
on the TV
VIDEO
VID1
SIGNAL
LINE
VID 1
VID
VID 2
VIDEO
Graphics contained within this publication are for representation only. Your unit might differ slightly.
Page 59
Button on the
Channel
TV remote
Number
S-VID
00
INPUT
90
SOURCE
91
AUX
92
Chapter 5: Additional Information
93
VID 1
VID 2
INPUT
59