Sony MCE-K700 Service Manual page 50

Pin No. Pin Name
57 PDCLK
58 V
SS
59 VSYNC
60 HSYNC
61 SO
62 FID
63 V
DD
64 XIICEN
All manuals and user guides at all-guides.com
I/O
13.5MHz pixel data clock output pin.
O This clock is obtained by 1/2 frequency-dividing SYSCLK.
Used only in the 16-bit pixel data mode.
Digital ground
–
V.sync signal output
O
O H.sync signal output
The functions of this pin are selected by Pin 64 XIICEN.
When the XIICEN pin is "H", sets into the SONY SIO mode, and becomes the S0 serial-
O
out output pin.
When the XIICEN pin is "L", this pin is not used and sets into high impedance.
Field ID output.
When control register bit "FDS"="1", "L" indicates the first field and "H" indicates the
O second field.
When control register bit "FDS"="0", "H" indicates the first field and "L" indicates the
second field.
Digital power supply
–
Serial interface mode selection input pin. Pulled-up.
O When "L", Pins 48 to 50, and 61 set into the I
When "H", Pins 48 to 50, and 61 set into the SONY SOP mode.
— 72 —
Function
2
C-BUS mode.