Initial Setup Wizard; Welcome Message And Language Selection; Initial Setup; Search For Accessories - Nokia Smart TV 2400A Manual

6. Initial setup wizard

Note: Follow the on-screen instructions to complete the initial setup process. Use the directional buttons and
the OK button on the remote to select, set, confirm and proceed.
When turned on for the first time, a welcome screen will be displayed. Select your language and press OK.
Follow the on-screen instructions to setup your TV and install channels. The installation wizard will guide you
through the setup process. You can perform initial setup anytime using the Reset option in the Settings >
Device Preferences Menu. You can access the Settings menu from the Home screen or from the TV options
menu in Live TV mode.

6.1. Welcome message and language selection

Welcome message will be displayed along with the language selection options listed on the screen. Select the
desired language from the list and press OK to continue.

6.2. Initial setup

After the country selection you can start the initial setup wizard. Highlight Continue and press OK to proceed.
You will not be able go back and change the language and country once you proceed. If you need to change the
language after this step you will have to switch the TV into standby mode, so the setup process starts from
the beginning when you next switch on the TV. To do this, press and hold the Standby button. A dialogue will
be displayed. Highlight OK and press OK.

6.3. Search for accessories

A search for accessories will be performed after the initial setup has started. Follow the on-screen instructions
to pair your remote control (depends on the model of the remote control) and other wireless accessories with
your TV. Press Back/Return button to end adding accessories and proceed.

6.4. Quick setup

If you didn't priorly connect your TV to the internet via Ethernet a screen will be displayed where you can
transfer your Android phone's WLAN network and Google Account to your TV. Highlight Continue and press OK
to proceed. Follow the on-screen instructions on your TV and your phone to complete the process.
You can also skip this step by selecting Skip option. Some steps may be skipped depending on the settings
made in this step.
If you did priorly connect your TV to the internet via Ethernet a message will be displayed stating that you
are connected. You can choose to continue with wired connection or change the network. Highlight Change
network and press OK if you want to use wireless connection instead of wired connection.

6.5. Network connection

You will be directed to the next step automatically, if you connect your TV to internet via Ethernet at this
point. If not, available wireless networks will be searched and listed on the next screen. Select your WLAN
network from the list and press OK to connect. Enter the password using the virtual keyboard if the network
is password protected. Select the Other network option from the list, if the network that you want to connect
has hidden SSID.
If you prefer not to connect to the internet at this point you can skip this step by selecting Skip option. You
can connect to internet later using the Network & Internet menu options in the Settings menu from the Home
Screen or from the TV options menu in Live TV mode.
This step will be skipped if internet connection has been established in the previous step.

6.6. Sign in to your Google account

If connection succeeds, you can sign in to your Google account on the next screen. You need to be signed in
to a Google account in order to use Google services. This step will be skipped if no internet connection has
been established in the previous step or if you already signed in to your Google account in Quick Setup step.
16