Pyle PGTAMPL128B User Manual

Portable Electronic Guitar Amplifier
5'' High-Definition Speaker with Volume,
Bass and Treble Controls
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT.
Precautions
To assure the nest performance, please read this manual carefully.
Keep it in a safe place for future reference.
• Install this unit in a well ventilated, cool, dry,
clean place - away from direct sunlight, heat
sources, vibration, dust, moisture, and/or cold.
(Do not use/keep this unit in a car etc.)
• Locate this unit away from other electrical
appliances, motors, or transformers to avoid
humming sounds.
Power Supply
Be sure to turn the power OFF when the unit is not in use. Remove the batteries
from the instrument to prevent possible leakage of the battery uid if the
instrument is not to be used for a long time. If using a power adapter, please
connect the designated AC adapter to an AC outlet of the correct voltage.
Do not connect it to an AC outlet of voltage other than that for which your
unit is intended.
Interference with other Electrical Devices
Radios and televisions placed nearby may experience reception interference.
Operate this unit at a suitable distance from radios and televisions.
Handling
Do not use force on switches, knobs, and/or cords.
Care
Do not clean this unit with chemical solvents; this might damage the nish.
Use a clean, dry cloth.
Keeping foreign matter out of your equipment
Avoid installing this unit where foreign objects may fall onto this unit and/or
this unit may be exposed to liquid dripping or splashing.
2
www.PyleUSA.com
Controls and functions
PGTAMPL128B
PGTAMPL128B
1. Guitar Input: Link to an electric guitar by guitar cable
2. Distortion Button: Select clean sound or distortion sound
(Press to select distortion e ect)
3. Gain Knob: Adjust distortion level (works only when distortion e ect selected)
4. Bass Knob: Adjust guitar bass tone
5. Treble Knob: Adjust guitar treble tone
6. Volume Knob: Adjust volume
7. LED Light: Power indicator
8. Power Switch: Switch On/O power. Power indicator is lit when power ON.
9. Power In: AC 12V adapter input
10. AUX Volume Control: Adjust AUX music volume
11. AUX In: Link to a 3.5mm gauge audio cable
12. Battery Compartment: Load 6 AA batteries.
Reminder:
When AC 12V adapter is connected, the battery power will turn o .
When the adapter is disconnected, the battery power will connect automatically.
3
www.PyleUSA.com