Glass Turntable; Start Protection / Key Lock - Whirlpool AMW 732 Installation, Quick Start

All manuals and user guides at all-guides.com
GENERAL
T a number of accessories available on
HERE ARE
the market. Before you buy, ensure they are suita-
ble for microwave use.
E
are oven proof
NSURE THAT THE UTENSILS YOU USE
and allow microwaves to pass
through them before coo-
king.
W
HEN YOU PUT FOOD AND ACCESSORIES
wave oven, ensure that they do not come in con-
tact with the interior of the oven.
This is especially important with accessories
made of metal or metal parts.
I comes in contact
F ACCESSORIES CONTAINING METAL
with the oven interior, while the oven is in ope-
ration, sparking can occur and the oven could be
damaged.
A
that the turntable is able to turn
LWAYS ENSURE
freely before starting the oven.
TURNTABLE SUPPORT
U under the
SE THE TURNTABLE SUPPORT
Glass turntable. Never put any other
utensils on the turntable support.
Fit the turntable support in the
oven.

START PROTECTION / KEY LOCK

T HIS AUTOMATIC SAFETY FUNCTION IS ACTIVATED ONE
MINUTE AFTER the oven has returned to
"stand by mode". (The oven is in "stand
by" when the 24-hour clock is displa-
yed or if the clock has not been set,
when the display is blank).
ACCESSORIES

GLASS TURNTABLE

U G
SE THE LASS TURNTABLE
thods. It collects the dripping jui-
ces and food particles that other-
wise would stain and soil the inte-
rior of the oven.
Place the Glass turntable on
the turntable support.
CRISP HANDLE
U
SE THE SUPPLIED SPECIAL
in the micro-
to remove the hot Crisp plate from
DLE
the oven.
CRISP-PLATE
P
LACE THE FOOD DIRECTLY ON THE
Always use the Glass turnta-
ble as support when using
the Crisp-plate.
D O NOT PLACE ANY UTENSILS
Crisp-plate since it will quickly become
very hot and is likely to cause damage
to the utensil.
T C -
HE RISP PLATE
(max. 3 min..). Always use the Crisp function
when preheating the crisp-plate.
T HE DOOR MUST BE OPENED AND CLOSED
food into it, before the safety lock is released. Else
the display will show "DOOR".
with all cooking me-
C -
RISP HAN
C - .
RISP PLATE
on the
may be preheated before use
e.g. putting
5