Table of Contents
Advertisement
10.
Maintenance
Caution! Danger of injury!
The maintenance operations should be performed only with the machine switched off and with the motor stopped!
In the following table there are given the operations which should be performed and the respective time intervals between the individual operations.
Operation
Removal of the throat plate and its cleaning out.Cleaning out of the wheel feeder, hook and their
surrounding space. Removal of the residues of material and threads from the top roller.
Checking the oil level in oil reservoirs.
Checking the hook wear. Checking the function of the safety clutch against the hook overload.
Checking the V-belt and the indented belts.
11. Setting the machine according to the sewing category
11.1 Introduction
The sewing machine enables sewing within the extent from the light to medium heavy-duty sewing. The setting of the machine must be adapted to
the sewing parameters including also replacement of some components, such as e.g. needle, the throat plate insert. For this reason, the setting of
the machine is divided into 3 categories:
1 ... light sewing
2 ... medium sewing
3 ... medium heavy-duty sewing
In the factory, where this machine has been manufactured, the machine has been set with respect to the standard parameters of the required sewing
category which is designed by the number included in the commercial designation of the machine. If the user desires changing the given setting to
another sewing category, this operation should be performed by a specialized mechanician.
The standard parameters of sewing are described in the following paragraph. The actual parameters of sewing inside the given sewing category may
be different, which means that the machine operative must adapt respectively the setting of the machine, e.g. the tension of the upper thread.
All manuals and user guides at all-guides.com
33
Time interval
1 day
1 month
6 months
1 year
Advertisement
Table of Contents
