Dyson DCo7 Owner's Manual page 3

Box contents
Wand
Hose
1
Stair tool
Brush tool
Assembling your DCO7
Crevice tool
This machine was inspected and
packaged carefully before being
shipped from the factory.
If you need assistance during
Animal turbo tool
assembly or operation, please
Supplied with certain
call the Dyson Helpline on
models only, or available
1 - 866 - 693 - 9766.
as an accessory.
1 Slide the hose into the guides
at the back of the machine,
pushing the tab securely into
place.
Floor tool
Supplied with certain
models only, or available
as an accessory.
1 - 866 - 693 - 9766
Dyson Helpline contact us on
4
All manuals and user guides at all-guides.com
2
2 Pressing the wand release
button, slide the wand down
inside the hose.
3 4
3 Slide the wand into the top 4 Push the brush and stair tools
of the machine until it clicks securely into the storage holes
securely into place. You may on either side of machine.
need to press firmly and Fit the crevice tool into the tool
should hear a 'click' sound. clip on the back of the wand.
5
5 Store the cord safely by
winding counter-clockwise
around the cord winders and
securing with the cord clip.
5