HoMedics Circulation Pro CB200-CA Instructions For Use

This device does NOT vibrate – It uses electrical impulses.
Step 1. Remove the Circulation Pro from the packaging. Take out the
remote control and remove the screw from the backdoor using a
screwdriver. Insert 2 AAA batteries into the compartment following the
correct indicators for + and -.
Step 2. Connect the DC adapter to a suitable power outlet and plug
the small DC socket into the device.
Step 3. Turn on the power. The central display will light up orange
briefly.
Step 4. Remove footwear, socks or stockings. Place your bare feet
onto the foot pads.
NOTE: Both feet need to be on the device to activate the electrical
pulses.
INSTRUCTIONS FOR USE
CB200-CA