Table of Contents
Advertisement
Stop Bits [1]
The standard setting is 1 stop bit. Communication with slow devices may require more
Flow Control [Hardware RTS/CTS]
uses two wires to send start/stop signals.
VT -UTF8 Combo Key Support [Enabled]
This allows you to enable the VT -UTF8 Combination Key Support for ANSI/VT100
Recorder Mode [Disabled]
Legacy OS Redirection Resolution [80x24]
This allows you to set the number of rows and columns supported on the Legacy OS.
Putty Keypad [VT100]
Redirection After BIOS POST [Always Enable]
This setting allows you to specify if Bootloader is selected than Legacy console
Serial Port for Out-of-Band Management/ Windows Emergency Management
Services (EMS)
Console Redirection [Disabled]
Allows you to enable or disable the console redirection feature.
The following item appears only when you set Console Redirection
4-15
Advertisement
Table of Contents
