en-us Installation procedure
Installation procedure
4 Installation procedure
Follow these instructions to install the cooktop into the
Installation procedure
countertop.
CAUTION
Sharp edges.
Use protective gloves when installing the appliance.
▶
CAUTION
The appliance is heavy.
It is recommended that two people install this appliance.
▶
4.1 Securing the cooktop in the countertop
Evenly insert the unit in the cut-out.
1.
6
Press the unit firmly into the cut-out from above.
2.
Note: The appliance must sit firmly in the cut-out and must
not move, e.g. during cleaning.
5 Electrical connection
Electrical connection
Read these instructions to safely connect your appliance
Electrical connection
to the electrical supply.
5.1 Electrical requirements
Ensure that the following general requirements are met.
¡ You can find the rating plate with the electrical specifi-
cations on the underside of the appliance.
→ "Rating plate location", Page 7
¡ The junction box must be located within 3 feet of the
cooktop connection. It should be easily accessible for
service purposes.
4.3" (110 mm)
5.3" (135 mm)
Fitting/conduit 1" (25 mm)
Conduit approx. 3 feet (900 mm)
Junction box
approx 12" (300 mm)