Nokia 3650 User Manual page 68

Add a ringing tone for a contact
card or group
You can set a ringing tone for each contact card
and group. When that contact or group member
calls you, the phone plays the chosen ringing tone
(if the caller's telephone number is sent with the
call and your phone recognizes it).
1 Press to open a contact card or go to the
Groups list and select a contact group.
2 Select Options→
3 Use the scroll key to select the ringing tone you wish to use for the
contact or group and press Select.
To remove the ringing tone, select
tones.
Note: For an individual contact, the phone will always use the ringing
tone that was assigned last. So, if you first change a group ringing
tone and then the ringing tone of a single contact that belongs to
that group, the ringing tone of the single contact will be used
when the contact calls you the next time.
Tip: To listen to a ringing tone, go to Recorder.
Send contact information
1 In the Contacts directory, scroll to the card you want to send.
2 Select Options→
choices are: Via text
e-mail settings are in place),
card you want to send has now become a "business card". For further
information, see the 'Messaging' chapter, "Send and receive data via
infrared" on page 157, and "Send data via Bluetooth" on page 153.
You can add received business cards to your Contacts directory. See
"Receive smart messages" on page 96 for further information.
Ringing tone. A list of ringing tones opens.
No personal tone
Send business card
message, Via e-mail
via Infrared, or
[ 59 ]
from the list of ringing
then select the method, the
(available only if the correct
via Bluetooth. The contact
Contacts