Contender Shifnoid NC5300 Quick Start Manual

SHIFNOID WIRING DIAGRAM
SHIFNOID NC5300 ULTRA SHIFTER CONTROLLER
TO
+12V
RED
BLACK
TO
GROUND
TO TRANSBRAKE SWITCH
OR TRANSBRAKE SOLENOID
TERMINAL ON DELAY BOX
+
#1
RPM SWITCH
+
+
#2
RPM SWITCH
+
WHEN USING THIS CONTROLLER WITH A SHIFNOID SN5070, SN5055B, SN5055H, SN5057,
SA4070 OR SA4075 SHIFT KIT CONNECT BOTH THE 1stS AND THE 2ndS TERMIINALS ON
THE CONTROLLER TO THE SHIFNOID INTERFACE RELAY, POST 86 IN YOUR SHIFT KIT.
ANY RPM SWITCH USED WITH THE ULTRA SHIFTER CONTROLLER MUST SUPPLY
A NORMALLY OPEN GROUND ( N.O. GROUND). DO NOT USE ANY RPM SWITCH THAT
SHIFNOID
SHIFTER
SHIFTER
CONTROLLER
CONTROLLER
PATENT NO. 5,722,293
+
YELLOW
BLACK
RED
WHITE
+
+
YELLOW
BLACK
RED
WHITE
+
SENDS VOLTAGE.
R
ULTRA
ULTRA
NORMALLY OPEN GROUNDS
TO SHIFNOID INTERFACE RELAY
OR AIR SOLENOID VALVE(S)
TO 2nd to 3rd SHIFT
RELAY or VALVE
TO 1ST to 2ND SHIFT
RELAY or VALVE
TO TACH TERMINAL
ON IGNITION BOX*
c SHIFNOID Ltd., 2010
(S)