Mitsubishi Electric CITY MULTI PEFY Series Technical & Service Manual page 9

[ II Part Names and Functions ]
The main display can be displayed in two different modes: "Full" and "Basic".
The initial setting is "Full". To switch to the "Basic" mode, change the setting on the Main display setting.
<Full mode>
* All icons are displayed for explanation.
n b cde f g h
m
6
7
8
9
0
1
a
k
①
Operation mode
②
Preset temperature
③
Clock
See the Installation Manual.
④
Fan speed
⑤
Button function guide
Functions of the corresponding buttons appear here.
⑥
Appears when the ON/OFF operation is centrally controlled.
⑦
Appears when the operation mode is centrally controlled.
⑧
Appears when the preset temperature is centrally controlled.
⑨
Appears when the filter reset function is centrally controlled.
⑩
Indicates when filter needs maintenance.
⑪
Room temperature
See the Installation Manual.
⑫
Appears when the buttons are locked.
⑬
Appears when the On/Off timer, Night setback, or Auto-off timer
function is enabled.
appears when the timer is disabled by the centralized control
system.
⑭
Appears when the Weekly timer is enabled.
HWE1706A
2
5
<Basic mode>
n
3 m
i
l
j
1
4
⑮
Appears while the units are operated in the energy-save mode.
(Will not appear on some models of indoor units)
⑯
Appears while the outdoor units are operated in the silent mode.
⑰
Appears when the built-in thermistor on the remote controller is
activated to monitor the room temperature (a).
appears when the thermistor on the indoor unit is activated to
monitor the room temperature.
⑱
Indicates the vane setting.
⑲
Indicates the louver setting.
⑳
Indicates the ventilation setting.
㉑
Appears when the preset temperature range is restricted.
㉒
Appears when an energy-saving operation is performed using a
"3D i-See sensor" function.
㉓
Centrally controlled
Appears for a certain period of time when a centrally-controlled
item is operated.
㉔
Error display
An error code appears during the error.
* When an error code is displayed on the main display, an error is
occurring but the indoor unit can keep its operation. Check the
error code, and consult your dealer.
Most settings (except ON/OFF, mode, fan speed, temperature)
can be made from the Main menu.
- 4 -
2
5
3
4
GB