Table of Contents
Advertisement
(3) How to Enter the Service Mode
To use the functions dedicated to the repair service, the user should enter the service mode. Type the
following address in the "Address" field of the Web-browser (IE5.0 or later) to enter the service mode.
http://IP ADDRESS/service (Enter the projector´s IP address in ''IP ADDRESS".)
Fig. 1 Index screen
When the user is prompted to enter the user name and the password, type them as follows.
User name : service
Password : vpl-gh10
If the user wants to move to another page from the service mode once, and then re-enter into it again, exit
the Web-browser and re-launch it.
User name : service
Password : vpl-gh10
Fig.2 Password entry screen
1-26
VPL-GH10
Advertisement
Table of Contents
