Table of Contents
Advertisement
Note:
When assembling the P(P-1)-Board and the P(P-2)- Board,
the position of each hole of the insulation sheets(A, B, C, D)
is set to the position of each hole of the P(P-1)-Board and
the P(P-2)-Board and then assemble them. (
indicate setting positions.)
6.3.
Remove the PB-Board
1. Unlock the cable clampers to free the cable.
2. Disconnect the couplers (PB30, PB31, PB32, PB33, PB34,
PB35, PB37 and PB38).
marks
3. Remove the screws (×3
unit.
4. Remove the screws (×1
6.4.
Remove the D-Board
1. Remove the PB-Board unit.
2. Disconnect the couplers (D3, D5, D20 and D25).
3. Disconnect the flexible cables (D31, D32, D33 and D34).
4. Remove the screws (×1
11
TH-65PV500E / TH-65PV500B
) and remove the PB-Board
) and remove the PB-Board.
) and remove the D-Board.
Advertisement
Table of Contents
