Drive Unit Disassembly - Sharp Z-21 Service Manual

4
Remove the MC cable (red) and GRID cable (white). (1 screw for
each)
Spring
@
Note for attachment:
1
Be careful not to mistake the attachment position of each
cable. (Refer to the figure above.)
2
The spring terminal must be on the cable terminal.
5
Disconnect the connector, and remove four screws and the
main PWB.

8. Drive unit disassembly

1
2
White
3
Red
4
Main PWB
– 18 –
Remove the document table.
Remove the top cabinet.
Remove the bottom cabinet.
Remove the drum cartridge.
Bottom cabinet