Memorizing The Channels - Sanyo AVL3211 Instruction Manual

Sanyo 32" * lcd high-definition colour tv and computer monitor

Table of Contents

Your TV can memorize and store all of the available channels. After the available channels are memorized, use CH+/- to scan

through the channels.

Selecting the TV Source

Before you start AUTO SCAN, it is necessary to specify the type of signal source that is

connect to the unit.(i.e., an antenna or cable system).

Press MENU to display the menu main page.

Press

or4

repeatedly to select

Then the [SOURCE]

item

select AIR or CABLE item

Press

or4

In AIR mode, the set receives antenna signal.

In CABLE mode, the set receives cable TV program.

Press MENU button repeatedly to exit.

Searching Channels Automatically

Navigate to the TV-CHANNEL menu, and highlight AUTO SCAN item.

Press 3

or4

begin the auto channel search

The unit will begin memorizing all of the available channels.

Note: During the process of the Auto Scan, you can press MENU button

to stop the search.

Skipping Channels

Navigate to the TV-CHANNEL menu, and highlight CHANNEL item.

Press 3

or4

to select a channel you want to skip.

to select ADD/ERASE item.

Press

to select ADD or ERASE.

Use 3

or 4

When the item is set to ERASE, the selected channel will be skipped.

When the item is set to ADD, the selected channel will not be skipped.

Press MENU button repeatedly to exit.

The skipped channels can not be selected by using CH+/- buttons unless you use

number buttons to input channel number directly.

Manual Fine Tuning

Select a channel you want to perform fine tuning.

Navigate to the TV-CHANNEL menu, and

select FINE TUNE item.

Press 3

or 4

to start the fine tune till the best possible picture and

sound are obtained.