Related Manuals for Fisher M-1060C
Summary of Contents for Fisher M-1060C
- Page 1 INSTRUCTION MANUAL Compact Cassette Recorder M-1060C 1AD6P1P0718-R M-1060C/M-1110C, Issue Number 1 M-1060C M-1110C M-1110C ENGLISH Printed in China...
- Page 2 CONTROLS (Fig. 1) Fig. 1 1. Battery/Operation indicator (BATT/OPR) (M-1110C only) 2. Voice activated system switch (VAS) (M-1110C only) 3. Volume control (VOLUME) 4. Microphone jack (MIC) (M-1110C only) 5. Earphone jack (EAR) 6. Built-in microphone -E1-...
- Page 3 7. Cassette compartment 8. Battery compartment (back panel) 9. Tape counter and reset button (M-1110C only) 10. Record button (REC) 11. Play button (PLAY) 12. External DC 3V jack (EXT DC 3V) 13. Fast forward/Cue button (FFWD/CUE) 14. Rewind/Review button (REW/REV) 15.
- Page 4 Battery Install two “AA” batteries (not supplied) as shown in Fig. 3. Observe proper polarity. • If you are not going to use the unit with batteries for one month or more, remove the batteries. Battery replacement When the BATT/OPR indicator (M-1110C only) does not light during operation or is lit dimly, replace the batteries.
- Page 5 IMPORTANT NOTE: SPENT NICKEL-CADMIUM RECHARGE- ABLE BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY IN COMPLIANCE WITH ALL APPLICABLE LAWS. FOR DETAILED BATTERY RECYCLING INFORMATION, CONTACT THE RECHARGE- ABLE BATTERY RECYCLING CORPORA- TION AT 1-800-822-8837. CONNECTIONS External microphone (M-1110C only) Connect an external microphone (not supplied) to the MIC jack.
- Page 6 1. Load a cassette as shown in Fig. 6. 2. Press the reset button to set the counter to “000”. The counter shows relative tape position. (M-1110C only) 3. Set the VAS switch to ON or OFF. (M-1110C only) 4. Press the REC button. (The PLAY button is engaged simultaneously.) VAS ON: Voice activated re-...
- Page 7 Fast forwarding or rewinding In the stop mode, press the FFWD/CUE or REW/REV button. Press the STOP button when the desired point or end of the tape is reached. Temporarily stopping operation (all modes) Slide the PAUSE switch right. Slide it left to resume operation. Quick reviewing and recording While recording, press and hold the REW/REV button (the REC button is released) until the tape has rewound to the...
-
Page 8: Maintenance
PLAYBACK (Fig. 8) 1. Load the cassette as shown in Fig. 6. 2. Press the PLAY button and adjust the VOLUME control. 3. Press the STOP button to stop playback. Cue and reviewing While playback, press and hold the FFWD/CUE or REW/REV button. Release the button when the desired point is reached. - Page 9 SUBMITTED AT THE TIME WARRANTY SERVICE IS REQUESTED. Subject to the OBLIGATIONS above and EXCLUSIONS below, SANYO FISHER COMPANY (SFC) warrants this SANYO Dictation product against defects in materials and workmanship for the periods of LABOR and PARTS specified below. SFC will, at its option, within two business days after its receipt of any dictation product that fails to conform to this warranty at SFC’s designated facility, either...
- Page 10 21605 Plummer Street Chatsworth, CA 91311 -E9-...