Opening & Closing Digital Safe; Open Safe With Passcode & Key; Close Safe; Open Safe With Override Key - First Alert 2054DF Operations & Installation Manual

Opening & Closing Digital Safe
Open Safe with Passcode & Key
Once your passcode has been entered into the memory,
the safe can be opened by following these simple steps:
1. Insert one of the Companion Entry Keys (round
top) into the lock cylinder but, DO NOT TURN KEY.
2. Press the * button on the keypad, followed
by your personal code and the # button.
3. The LCD display will read "GOOD" and you will hear
a tone indicating that the safe door is unlocked.
4. To open, turn the Companion Entry Key (round top)
to the RIGHT.
Note: You must open the safe door within 3 seconds
or the electronic lock automatically engages.
TURN ENTRY KEY TO RIGHT ONLY
When using the Companion Entry Key, you
must ONLY TURN IT TO THE RIGHT. Turning
it to the left may cause key to become stuck in
the cylinder and may cause damage to the lock.

Close Safe

1. Make sure the key is in the open position: Right for Companion Entry Key
(round top), and left for Emergency Override Key (square top).
2. Close the door and turn the key to the locked position.
3. Remove the key from the lock.

Open Safe with Override Key

If unable to gain access using your passcode and Companion
Entry Key (round top), you may use the Emergency
Override Key (square top) to open the door at anytime.
1. Insert the Emergency Override Key (square top) in the lock,
turn to the left (counterclockwise) and pull the door open.
4