Table of Contents
Advertisement
BLADE UNIT REPLACEMENT
Unplug PowerTrim. Remove
SafeCut™ Guard
(magnetic catch).
CHANGING CUTTING STRIPS
Unplug PowerTrim. Remove
SafeCut™ Guard (magnetic
catch).
REPLACEMENT ACCESSORIES
The following replacement parts are available for PowerTrim as a combined accessory pack (#54125):
Item
1 blade unit
2 cutting strips
Unscrew the 2 cross
head screws on either
side of the cutter blade
unit (Phillips type
screwdriver).
Make sure SafeCut™
Clamp is open.
Required
After 2000 cuts
After 500 cuts
Remove the cutter
blade unit by pulling
the button on the blade
unit. Replace with new
blade unit (#54125).
Rotate small safety catches to release the cutting strip. Turn
cutting strip over to use other side of the strip . When all
areas have been used, replace cutting strip with new one
from accessory pack (#54125). Re-secure cutting strip and
SafeCut™ Guard again.
Tighten screws. Re-secure
SafeCut™ Guard.
7
Advertisement
Table of Contents
