Table of Contents
Advertisement
Using the Purity function
Purity function will remove harmful materials in the air to provide you clean and healthy environment.
You can select this function additionally while the air conditioner is in operation.
When the air conditioner is turned on
Remote controller display
When the air conditioner is turned off
Remote controller display
22
1.
Press the Options button.
2. Press the <, > or Options button until (
3. Press the SET button to set the Purity function.
- (
) (
) indicator will be displayed on the remote controller display
and Ionizer function will begin.
f
Press the Options button press the <, > or Options button to
Cancel
make the (
• You may select the purity function additionally during Auto/Cool/
Dry/Heat mode and you can adjust the temperature.
NOTE
• If the purity function is selected additionally in fan mode, the
temperature cannot be adjusted.
•
When the air conditioner and the purity function are turned
on simultaneously and you press the Power button, both air
conditioner and purity function will stop operation.
•
You can still use the purity function when the On timer is set with
the air conditioner is turned off.
• There will not be much difference on energy consumption and
operating noise when the purity function is selected additionally
while the air conditioner is turned on.
1. Press the Options button.
2. Press the SET button when (
- (
) (
) indicator will be displayed on the remote controller display
and Ionizer function will begin.
f Press the Options button to make the (
Cancel
press the SET button.
) indicator starts to blink.
) indicator blink and press the SET button.
) indicator blinks to begin purity function.
) indicator blink and
Advertisement
Table of Contents
