Toshiba RAC-WK0512CMRU User Manual page 19

5. Secure Air Conditioner
Fig. 7A
Fig. 8A
RAC-WK05/06 only
Fig. 8B
Fig.8
User Manual
B. Extend the side panels out against the window frame (Fig. 6).
Fig. 6
window
frame
Fig. 7B
B1: For wooden windows:
Drive 1/2" (12.7 mm) locking screws through the top rail and into
the window sash (Fig. 8A).
NOTE: To prevent window sill from splitting, drill 1/8" (3mm)
pilot holes before driving screws. Drive 1/2" (12.7mm) locking
screws through frame holes into window sash (Fig. 8B/8C).
Models RAC-WK08/10/12
Fig. 8C
Fig. 9
A. Place the frame lock between the frame extensions
and the window sill as shown (Fig. 7A for Wooden
windows), (Fig. 7B for Vinyl-Clad windows).
Drive 3/4" (19 mm) or 1/2" (12.7 mm) locking
screws through the frame lock and into the sill.
B2: For Vinyl-Clad windows:
Fig.8
C. Secure lower sash in place
FOAM SEAL
D. Cut Window sash seal foam
Fig. 10
Fig. 9
Drive 1/2" (12.7 mm) locking
screws through the top rail
and into the window sash
(Fig. 8B/8C).
NOTE: Before driving the
screws, drill 5 holes into the
window through the holes
of the top rail and side panel
frames as shown (Fig. 8B/8C).
by attaching the sash lock
with the 3/4" (19 mm) or
1/2" (12.7 mm) screw as
shown (Fig. 9).
and insert it in the space
between the upper and
lower sashes (Fig. 10).
Page 19