Table of Contents
Advertisement
Video
This is the setting screen for the HDMI/SDI terminal
and streaming video.
After configuring the different items, press the
[Submit] button.
The settings will be applied when the camera is
next restarted.
Video Settings
9 HDMI/SDI Output
For selecting the video output destination.
[Setting Values: RHDMI, SDI]
9 Video Format
For selecting the video output frame rate.
[Setting Values: 50Hz, 60Hz, RDial Priority]
(A P34 [Selecting the Video Output
Resolution and Frame Rate] )
9 Encode Level
For selecting a streaming video encoding level.
[Setting Values: Rmainprofile, highprofile]
Memo :
If [Encode Codec] for [First Stream] or [Second
0
Stream] is configured to "H.265", the setting is
fixed at "mainprofile".
First Stream, Second Stream
RTSP and RTMP(S) allow simultaneous streaming
of videos in the First Stream and Second Stream
settings.
9 Encode Codec
For selecting the streaming video codec.
[Setting Values: RH.264, H.265, MJPEG]
9 Resolution
For selecting the streaming video resolution.
[Setting Values (First Stream): 3840x2160 T,
R1920x1080, 1280x720, 1024x576, 720x480,
720x408, 640x480, 640x360]
[Setting Values (Second Stream): 720x480,
720x408, 640x480, R640x360, 480x320,
320x240]
Memo :
The selectable resolutions vary according to the
0
SYSTEM SELECT switch setting.
28
Video
9 Bit Rate
For configuring the bitrate of the video stream when
[Encode Codec] is configured to "H.264" or "H.
265".
[Setting Values: 32kbps to 61440kbps]
9 Qfactor
For configuring the Q value when [Encode Codec]
is configured to "MJPEG".
[Setting Values: 1 to 99]
9 Frame Rate
For configuring the streaming video frame rate.
Memo :
The selectable frame rates vary according to the
0
SYSTEM SELECT switch setting.
9 I Key Frame Interval
Performs encoding with the I-frame as the starting
point.
Lowering the value to shorten the interval helps to
maintain a stable picture quality even when there
are rapid changes in the video image. However, the
picture quality for video images with little change
will deteriorate.
[Setting Values: 2 to 60]
Memo :
The selectable I-frame intervals vary according
0
to the SYSTEM SELECT switch setting.
9 Bit Rate Control
For selecting Constant Bitrate (CBR) or Variable
Bitrate (VBR).
[Setting Values: RCBR, VBR]
Advertisement
Table of Contents
