U-Line H-2961 Manual

π
H-2961, H-2962
DRUM HEATER
WARNING! Read these instructions before installing, operating or servicing this product. Failure to
understand these instructions could result in an accident causing serious injury or death.
A safety alert symbol is used to call attention to
instructions concerning user's personal safety. Read
the message that follows the symbol and be alert to
the possibility of personal injury or death:
DANGER! Immediate hazards will result in
severe personal injury or death.
• A person who has not read and understood all
operation instructions is not qualified to operate this
product.
• Do not immerse heater in liquid.
• Keep volatile or combustible materials away from
heater when in use.
• Keep sharp objects away from heater.
• Do not modify this product. Modification will void
warranty and could lead to personal injury or death.
WARNING! Hazards or unsafe practices that
could result in severe personal injury or death.
• Only qualified personnel are allowed to connect
electrical wiring.
• Disconnect all power at the source before making
any power connections.
• All electrical wiring must follow local and national
codes.
• The person who performs the final installation or
wiring must be qualified for this work.
• User is responsible for providing a suitable
disconnecting device.
• User is responsible for providing suitable electrical
protection devices. It is highly recommended that
a ground fault circuit breaker is used.
• Consult proper authorities for information for safe
heating of materials of any vessel being heated.
PAGE 1 OF 14
1-800-295-5510
uline.com
INSTRUCTIONS
SAFETY
CAUTION! Hazards or unsafe practices that
could result in personal injury or property
damage.
• Do not apply power to heater prior to proper
installation. Disconnect power supply to heater
before removing the heater from installation.
• Never handle the heater while it is in operation.
Always disconnect the heater from the power source
and allow to cool prior to handling.
• Never operate heater without a temperature control
device.
• Inspect heater before use.
• Do not wrap the heater over itself.
• If spillage of foreign matter onto heater occurs,
disconnect from power source and clean after heater
is allowed to cool.
• Never operate without an appropriate heat sink
(device being heated is considered a heat sink).
• Do not operate heater above the rated temperature
value.
• Do not attempt to repair a damaged or faulty heater.
• Do not crush, fold or apply severe physical stress onto
heater or cord assembly.
• Disconnect heater when not in use.
• When cool, heater should be rolled for convenient
storage and placed in original packaging.
• Use specified heater with corresponding drum size.
Do not use for other applications.
Para Español, vea páginas 5-9.
Pour le français, consulter les pages 10-14.
1221 IH-2961