Design Mode - Toshiba 43PH46P Service Manual

1. ENTERING TO DESIGN MODE
1) Select the Service mode.
S
When QA02 is initialized, item "OPT3" of DESIGN MODE is set to the data of the representative model of this chassis family.
Therefore, because ON-SCREEN specification remains in the state of the representative of model. This model is required to
reset the data of item "OPT3".
2. SELECTING THE ADJUSTING ITEMS
Every pressing of CHANNEL
( button for reverse order)
Refer to table-3 for data of design mode.
(See SETTING & ADJUSTING DATA on page 30)
3. ADJUSTING THE DATA
Pressing of VOLUME or
All manuals and user guides at all-guides.com

DESIGN MODE

2) While pressing CALL button on Remote
and press MENU button on TV.
(Design mode)
button in the design mode changes the adjustment items in the order of table-3.
button will change the value of data.
- 13 -
3) Press MENU button on TV.
Press
D
Press
(Adjustment mode)
ITEM
DATA