Miele G 5051 Operating Instructions Manual page 71

Hide thumbs Also See for G 5051:
Table of Contents

Advertisement

Problem
Plastic parts are
discoloured.
White residue is visible
on the dishware.
Clouding has occurred
on glassware and
cutlery. The film can be
wiped off.
There are rust stains on
cutlery.
Frequently Asked Questions
Possible cause and solution
Natural dyes, e.g., from carrots, tomatoes, or
ketchup may be the cause. The amount of detergent
used or its bleaching effect was not sufficient to deal
with natural dyes.
 Use more detergent (see "Detergent").
Parts that are already discoloured will not revert to
their original colour.
The rinse aid dosage is set too low.
 Increase the dosage (see "Rinse aid" under
"Before using for the first time").
Unsuitable combination detergents were used.
 Switch to another detergent. If using detergent
tabs or powder detergent, do not choose
combination products and ensure you refill the
rinse aid.
The affected items are not corrosion resistant.
 No remedy.
Purchase cutlery which is dishwasher-safe.
71

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

G 5056G 5056 scviG 5051 scvi

Table of Contents