Advertisement
Do not wear the device too tightly. Make sure to keep the device clean and dry.
Though this device has met international safety standards, some people may
experience skin irritation if they are allergic to certain substances
To prevent possible hearing damage when using a headset, do not listen to
sound at high volume for long periods.
To view the full safety information including device and battery disposal instructions,
launch Samsung Gear on you mobile device and tap (MORE) → User manual.
Maintaining water and dust resistance
Your device supports water- and dust-resistance. Follow these tips carefully to
maintain the waterand dust-resistance of your device. Failure to do so may result in
damage to your device.
• Do not immerse the device in water deeper than 1.5 m or keep it submerged for
more than 30 minutes.
• Do not expose the device to water moving with force.
• When you are wearing the device, avoid taking a shower or going swimming.
• If the device or your hands are wet, dry them thoroughly before handling the device.
• If the device is exposed to clean water, dry it thoroughly with a clean, soft
cloth. If the device is exposed to other liquids, such as salt water, ionised
water, or alcoholic beverage, rinse it with clean water and dry it thoroughly
with a clean, soft cloth. If you do not follow these instructions, the device's
performance and appearance may be affected. If the device is dropped or
receives an impact, the water- and dust-resistant features of the device may be
damaged.
• If the device has been immersed in water or the microphone or speaker is wet,
sound may not be heard clearly during a call. Wipe the device with a dry cloth or dry
it thoroughly before using it.
• The touchscreen and other features may not work properly if the device is used in
water.
Your device has been tested in a controlled environment and certified to be
water- and dust-resistant in specific situations and conditions. (Meets the
requirements of the water-resistance in a 50m deep water as described by the
international standard ISO 22810:2010 and your device can be used in shallow
water. Meets the requirements of the dust-resistance as described by
classification IED 60529 IP6X.)
Advertisement
