Edimax ES-3124REM User Manual page 37

Parameter
You can change priority value, A value used to identify the root bridge. The
Priority
bridge with the lowest value has the highest priority and is selected as the
root. Enter a number 1 through 65535.
You can change Max Age value, The number of seconds a bridge waits
Max Age
without receiving Spanning-Tree Protocol configuration messages before
attempting a reconfiguration. Enter a number 6 through 40.
You can change Hello time value, the number of seconds between the
Hello Time
transmission of Spanning-Tree Protocol configuration messages. Enter a
number 1 through 10.
You can change forward delay time, The number of seconds a port waits
Forward Delay
before changing from its Spanning-Tree Protocol learning and listening
states to the forwarding state. Enter a number 4 through 30.
Time
4. The following parameter can be configured on each port,
click Apply button to modify.
Parameter
You can make it more or less likely to become the root port, the rage is
Port Priority
0-255,default setting is 128 the lowest number has the highest priority.
Specifies the path cost of the port that switch uses to determine which port
Path Cost
are the forwarding ports the lowest number is forwarding ports, the rage is
1-65535 and default value base on IEEE802.1D
10Mb/s = 50-600 100Mb/s = 10-60 1000Mb/s = 3-10
Description
Description
37