Yaesu FT-767GX Operating Manual page 9

fUNC (T SET) (Orange Key)
This Is the special
(wíth one push) tbe alternate functlons of
a li other keys. 1 f this key Is pressed
l w1ce in succession,
frequencies for the (optional) fTS-8 Tone
Squelch
Unit can be selected by the
BAND/MCH keys.
MR
(4)
The default function causes exit from the
VFO mode and recaJls the last-used memory
channel (lndicated to
operatlng frequency on the dlsplay).
alternate functioo enters lhe digit 4 in
place of the blinking dlsplay digll selec­
led for keypad frequency enrry.
(5)
SPLIT
When operating on a VFO, lhe default func-
ion causes the other VFO frequency to
1
become lhe transmitting frequency, while
the dlsplayed VFO chen serves as receive
frequency only. The alremare funcuon
entcrs the dlgit 5 in place of the blln­
king display digit selected for frequency
ent ry.
VfODM (6)
The defaulr function exchanges thc memory
and mode of the selected VfO w1th the
memory and mode of the selected memory
channel. No dara is overwrll1en.
ai remace funclion enters lhe dlgil
place of the blinking display dlgt1 selec­
ted for frequency entry.
H/G (ENT)
The defaulr function toggles the selected
VFO betweeo Ham bands
on Hf. When General Coverage Is selected
the green LED beneath che display window
is liL. The alternate (ENT) function
causes whatever digits have becn setected
by the numeric keys and displayed (whh
one dlglt bllnking) to be en1ered into the
VFO, al which time operation shlfts to the
new frequency and the functions of all
keypad keys return
sta1es. Once lhe orange FUNC key is pres­
thls key must be presscd 10 return
sed,
and
keypad 10 normal (default)
lhe display
operatlon.
key thal actlvates
the subaudible tone
the righl of lhe
The
The
6 in
and
General Coverage
to lhe1r default
-
AC (0)
The default function requires two presses
o f thls key ln succession,
clar1f1er and/or splll offsets.
ternate function
place of the bhnking display digit selec­
ted for frequency entry.
CLAR ( 1)
The default function loggles the clarlfier
on and off, which causes the transmlt fre­
quency lO remain fixed while the runlng
knobs and buttons control only the rece1-
ving freq uency. Note tbat once a clarifier
.
offset Is tuned, lt is stored ln a speclal
memory even when th1s key is used to turn
the clarlfler off
erases the clarlfier memory}.
nate functlon of this key enters the dlgit
1
in place of the blinking display diglt
selecced for frequency encry.
MCK (2)
The default ( memory check) funccion allows
display of the contents
channels wlthout
When th1s key 1s pressed the MR 1nd1ca1or
at the left of the display and the CH
lndlcator ar the right of the display both
blink. The contents of each memory chan­
n e I
cen b e checked
BAND/MCH keys to step tbrough the memo­
ries. Press thls key agaln to return che
display lo normal.
enters the digit
king dísplay dlgit selected for frequency
entry.
OffSET
(3)
When rhe clarlfier or split operatlon Is
active, the default function of this key
causes the difference between the transmlt
and receíve frequencles to be dlsplayed
(with a preceedlng
frequency Is lower).
to return the dlsplay co normal.
ternate function
place of the blinking
ected for frequency emry.
7 -
and cancels
The al­
digit O in
enters rhe
(only the 'AC' key
Tbe alter­
of the memory
disturbing operatlon.
b y pressing the
The alternate functlon
2 io place of the blin­
'-' if the transmlt
Press this key egain
The al­
3
enters the diglt
display digit sel­
ln