Table of Contents
Advertisement
Washing
6. Starting the programme
The programme can be started when
the Start/Stop sensor is flashing on and
off.
Touch the Start/Stop sensor.
The door will lock and the programme
will start.
The programme status will appear in
the display.
Main wash
Time left
Cottons
The washer-dryer will keep you updated
on the programme status and the time
remaining for the programme to run.
If a Timer period has been selected, this
will count down in the display until the
programme starts.
The drum lighting switches off once the
programme has started.
Saving energy
After 10 minutes, the indicators will dim.
The Start/Stop sensor flashes slowly.
You can reactivate the indicators:
Touch the Start/Stop sensor (this
does not have any effect on a
programme that is running).
42
11:02
2:25
h
Main wash
Add laundry
Adding laundry - AddLoad
Laundry can be added or removed if
is illuminated in the display.
Add laundry
Touch the
Add laundry
The following will appear in the display:
Please wait
The programme will stop and the door
will unlock.
Open the door.
Add or remove laundry.
Close the door.
Touch the Start/Stop sensor.
The programme will continue.
Laundry cannot be added or removed
if:
- The suds temperature is above 55°C
- The water inside the drum is above a
certain level
sensor.
Advertisement
Table of Contents
