Installation - JVC HR-V520SE Instructions Manual

Installation

Connecting the VCR
Basic Connection
1) Disconnect the TV's power cord from the AC outlet.
2) Disconnect the VHF/UHF TV aerial coaxial cable from
the TV.
3) Connect the VHF/UHF TV aerial coaxial cable to the
VCR.
4) Connect the VCR to the TV using the RF cable.
5) Plug the power cords of the VCR and TV into the AC
outlets.
(TV)
to aerial socket
RF cable
(supplied)
to RF OUT
Note: • If your TV has AUDIO input jacks, you may connect
the AUDIO OUTPUT L/R jacks on the back of this
VCR to the AUDIO input jacks on your TV.
Audio cable
(not supplied)
IN
L R
AUDIO
Other Connections
Euro Scart (AV) Sockets
Your VCR is provided with two Scart sockets which you may
connect to other external devices with Scart sockets. We
recommend this connection to ensure a better audio and
picture quality.
Decoder (not supplied)
to 21-Pin Scart Jack
Euro Scart cables are obtainable at your dealer.
VHF
UHF
VHF/UHF
MIXER
AUDIO
OUTPUT
to AERIAL
AERIAL
L
RF OUT
R
(Back of the unit)
[Back of the VCR]
AUDIO
OUTPUT
L
R
[A/V television]
(TV)
to aerial
socket
to 21-Pin
Scart Jack
AV2 (DECODER) AV1 (TV) AV1 (TV)
AUDIO
OUTPUT
AERIAL
L
RF OUT
R
to RF OUT
AV1 (TV) Connection to TV
If your TV has Scart sockets, you may connect your VCR's
AV1 (TV) scart socket to the Scart socket on the back of your
TV. Please see the instruction manual for your TV.
Note: •
You may connect the VCR to your audio amplifier.
1) Prepare an audio cable (not supplied).
2) Switch off your audio amplifier.
3) Insert one end of the audio cable into the corresponding
red and white AUDIO OUTPUT L/R jacks at the back of
the video recorder and the other end into the
corresponding audio input jacks at the audio amplifier.
[Back of the VCR]
AUDIO
OUTPUT
L
R
AV2 (DECODER) Connection for Other External Devices
The second Scart socket AV2 (DECODER) is designated for
other external devices, e.g. decoder, another VCR, video
camera and so on.
Note: •
If you want to connect a TV with Scart socket to your
VCR, the TV must be connected to the VCR through
AV1 (TV). A connection to AV2 (DECODER) will
not function correctly.
AV Front Terminals
When you copy a video tape, or watch a programme recorded
on an another source, use the AUDIO/VIDEO input jacks on
the front panel of the VCR.
Note: •
When you connect a monaural VCR (another source)
to this VCR, connect the audio output jack of the
monaural VCR (another source) to the AUDIO L jack
of this VCR. The audio signal will be recorded in both
L and R channel equally.
[Another source]
To the video
output jack
External Input Mode
To receive the signal from an external source (decoder, video
camera, another VCR, etc.), connect the source to the AV2
(DECODER) socket, and press
the Number buttons
. "AV2" appears on the TV screen. If you
use the AV1 (TV) socket, press
the Number buttons . "AV1" appears on the TV screen.
If you use the front AUDIO/VIDEO input jacks, press
PR (+/-) or enter "003" with
appears on the TV screen.
5
To the audio
output jack
[Front of the VCR]
VIDEO (MONO) L-AUDIO-R
Audio/Video
cables
(not supplied)
PR (+/-)
or enter "002" with
PR (+/-)
or enter "001" with
the Number buttons . "AV3"
EN