Make sure the water in your AquaBed Water Heater has reached room temperature
before cleaning and storing.
Unplug the power supply for your
1
AquaBed Water Heater.
First, disconnect the LOWER hose
3
connector by twisting the plug
counter-clockwise and slowly
pulling away from the AquaBed
Water Heater.
Drain out all remaining water
5
inside of your system.
After all of the water has been
7
drained, cover all hose connectors
with the original rubber caps.
2
4
6
8
www.aquabedwarmer.com
draining
& storage
Before disconnecting the hose
connectors to the Mattress Pad,
place a pitcher or large-size bowl
(preferred) underneath the unit.
When the hose connectors are
disconnected water will spill out.
Second, disconnect EACH hose
connector by twisting the plug
counter-clockwise and slowly
pulling away from the AquaBed
Water Heater.
To drain the Mattress Pad, use the
included hand-pump on one hose
connector to push the water out of
the other hose connector.
Before storing your AquaBed,
allow both the Mattress Pad and
the unit to dry.
13