Perform The Upgrade - Sony PMW-EX30 Quick Start Manual

Perform the Upgrade

Refer to the PMW-EX30 Operating Instructions for details
on using the PMW-EX30.
Upgrading Process
The process for performing the upgrade is shown below.
Action
Start computer
j
Install Version Up Tool
j
Start Version Up Tool
j
Agree to End User License
Agreement
j
Start PMW-EX30
j
a)
Install the device driver
j
Begin the upgrade
j
Restart the PMW-EX30
j
...... Repeats until the installation of the required modules is
complete
j
Version Up Tool Operation
Make sure that only one
instance of the Version Up Tool
is running
r
Make sure that the Version Up
Tool start normally
r
The [End User License
Agreement] window appears
Make sure that the computer
and PMW-EX30 are connected
r
Prompt installing the device
a)
driver
r
Make sure that the computer
and PMW-EX30 are in
communication
r
Check the power source of the
PMW-EX30
Check the model information of
the PMW-EX30
The [Begin Upgrade] window
appears
The [Perform Upgrade] window
appears
Perform the upgrade
r
The [Restart Connected
Device] window appears
Perform the upgrade
r
The [Restart Connected
Device] window appears
Restart the PMW-EX30
j
Exit the Version Up Tool
a) When using a Windows computer
Beginning the Upgrade
Notes
• During the upgrade, once a message appears asking you
to confirm the connection, we recommended starting the
PMW-EX30 in accordance with the on-screen
instructions (see page 4).
• A device driver is needed if you are using a Windows
computer. Although you can install this driver
beforehand, we recommend installing it during the
upgrade process (see page 4).
• Do not turn off the power during the upgrade process,
unless an on-screen message instructs you to do so.
Doing so could interrupt the upgrade process, and cause
malfunctions.
• Unplugging and plugging back in the cable of a USB
device during the upgrade process could cause a
communication error. Never do this, because a
communication error during the upgrade process could
damage the PMW-EX30.
1
Start your computer, and start the Version Up Tool by
double-clicking the "VersionUpTool" icon.
The [Version Up Tool] dialog appears.
If no problems are found in the Version Up Tool, the
End User License Agreement (EULA) window
appears, and asks you to agree to the EULA.
If an error occurs
If there is a problem in the Version Up Tool, an error
message will appear (see page 6).
2
Go to "Performing the Upgrade" (page 4).
Structure of the [Version Up Tool] dialog
box
The figure below shows the structure of the [Version Up
Tool] dialog box.
Perform the upgrade
r
The [Restart Connected
Device] window appears
r
The [Upgrade Complete]
window appears
3