Page 1
2.0 Installation and Programming Worksheet manuals. For further information regarding these new changes or enhancements, please refer to the Installation and Programming Worksheet manuals. If you have any questions, please call DSC Technical Support at 800 387 3630. Sincerely, Harry Scholz...
Page 2
Power 832 Version 2.0 Changes and Enhancements Keypad Commands: See Installation Manual section 3.4 “[ ] Commands” [ ][2] Trouble Display Trouble #7 – Device Low Battery Trouble [7] will occur if any wireless device has a low battery condition. To find the specific wireless transmitter with the low battery condition, press the [7] key once to display zones, twice to display handheld keypads, or three times to display wireless keys with a low battery condition:...
Page 3
Section [013] - First System Option Code: See Installation Manual section: Option [3] Show all Troubles while Armed Panel Shows Fire Troubles Only While Armed NOTE: This option must be OFF if LCD5500 keypads V1.x are used. Option [4] Tampers/Faults Do Not Tampers/Faults Show as Open 5.25 Show as Open...
Page 4
[380] First Communicator Option Code: See Installation Manual section 5.7.11 “Activity Delinquency” Option [8] ON Delinquency Follows Zone Activity OFF Delinquency Follows Arming If ON, the delinquency feature will be used to monitor zone activity. If OFF, the delinquency feature will be used to monitor arming activity. Section [381] - Second Communicator Option Code: See Installation Manual section 5.30 “Audio Interface Module”...