Installing The Touch Key Fpc To The - Huawei U9200 Maintenance Manual

8.3 Installing the Touch Key FPC to the Front Cover
(2012-06-13)
U9200 Maintenance Manual
Step 1 Place the touch key
FPC on the sub board.
Step 3 Paste the FPC to the board by
aligning it with the two positioning pins
on the front cover.
Paste the FPC in this direction.
Step 5 Align the FPC with the two
positioning pins, and paste it to the board.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Step 2 Use tweezers to tear off the four liners
in the sequence as shown in the figure above.
Step 4 Route the FPC through the hole, tear
off the two liners, and paste the FPC to the
correct position.
Step 6 Push the FPC upwards to align the
two positioning holes on the FPC and the
front cover.
INTERNAL
Page 30 of 80