Battery Charging - Fagor FG879 Instruction Manual

A. In Schedule setting process, press this to make the setting time increase or system time
number increase; when you keep pressing this button, the number will increase
automatically.
B. When robot in other mode, press this to make the robot start looking for auto-charging
docking.
3. "PLAN" schedule setting operation
In Standby or Charging status, press this to Enter/Quit System Time Setting process; press
this over 5 second to Enter/Quit Schedule Setting
Product Operation

Battery Charging

1. Charging Station Placement
Place charging station against the wall,
and remove obstacles about 1m at two
sides and 2m in front of the station as
show in the right figure.
Note:
if robot is powered off, then switch on the robot first before charging.
Charge the robot in either way as shown below:
2.
a. plug one end of the adapter into the robot and the other end into the power socket as shown in
Fig a.
b. Press "HOME" button on remote control or robot to operate the robot looking for the charging
docking automatically as shown in Fig b.
12