Philips sonicare Manual page 25

Warning: Do not clean the sanitizer when
the UV light bulb is hot.
For optimal effectiveness, it is recommended
to clean your sanitizer weekly.
1 Unplug the sanitizer.
2 Pull the drip tray straight out. Rinse the drip
tray and wipe it clean with a damp cloth.
3 Clean all interior surfaces with a damp cloth.
4 Remove the protective screen in front of the
UV light bulb.
To remove the screen, grasp the edges next
to the snaps, gently squeeze and pull out
the protective screen.
5 Remove the UV light bulb.
To remove the light bulb, grasp it and pull it
out of the metal clasp.
6 Clean the protective screen and the UV light
bulb with a damp cloth.
7 Reinsert the UV light bulb.
To reinsert the light bulb, align the bottom
of the light bulb with the metal clasp and
push the bulb into the clasp.
8 Reinsert the protective screen.
To reinsert the screen, align the pegs on the
screen with the slots on the reflective
surface near the UV light bulb. Push the
screen straight into the slots on the
sanitizer.
25
English