Toro HDX SD 2000 Series Operator's Manual page 38

Changing the Engine Oil
Note:
Dispose of the used oil at a recycling center.
1. Start the engine and let it run for 5 minutes.
Note:
This warms the oil so that it drains better.
2. Park the machine so that the drain side is slightly
lower than the opposite side to ensure that the
oil drains completely.
3. Disengage the blade-control switch (PTO) and
engage the parking brake.
Figure 42
4. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
5. Drain the oil from the engine
g036856
g311705
38
(Figure 43).
Figure 43
g036856
g027734