Advertisement
2.
Install the remote digital gauge.
2.1
Consider the following when mounting the remote
digital gauge:
A dry location in the wheelhouse or bridge.
D
The wiring harness length.
D
The mounting depth and overall size.
D
2.2
See Figure 4 for the gauge mounting dimensions.
Note: Dimensions are in mm [in.] and not to scale.
Figure 4 Two-Inch Digital Gauge Mounting Dimensions
2.3
Connect the wiring harness (GM96782) 6-pin
connector end to the 6-pin connector on the
gauge. See Figure 6.
2.4
Connect the wiring harness (GM96782) 12-pin
connector
end
customer-interface 12-pin connector.
Figure 6 and Figure 7. Use a remote extension
harness if additional length is required.
Note: Order a remote extension harness kit, if
required.
3 remote harness kits and DO NOT
exceed 40 m (131 ft.) in harness length.
See Figure 5 for kit selection.
TT-1715
2/17
to
the
generator
DO NOT use more than
Remote Extension Harness Kit Numbers
GM32333-KP1
GM32333-KP2
set's
Figure 5 Remote Extension Harness Kits
See
(For Gauge to Generator Set)
GM95503-B
Length
m (ft.)
4.6 (15)
7.6 (25)
3
Advertisement
