Door Lock Removal And Installation; Adjustment Of Rear Door Lock Free Wheeling Mechanism; Front Door Ventilator Assembly Adjustments - Cadillac 54-6219 1954 Shop Manual

BODY
5, Swing :ever -riti, attacltod rod away from
door to disangago sver from doom lack.
6. To Install reverse ret,',ovot pmocedttre.
28 Door Lock Removal and
Installation
I. Operate door glass to op position and remove
door tritn pad a:til loading hole cover.
NOTE:
Larger loaduiig hale cover shatttd bo
removed ttn front doers.
2. Ranrova dour otttside hattdle, Set Note 21.
3, Renrove doom lock remote control assembly.
See Ncute 27,
4 Reinave not securing lower end of glass trot
channel
at
door lock pillar.
5 Remove five door lock attachiiig screws, Fig.
3-27, lower lack to clear glass ronchanneland
re
move lnck throuugh :aadittg iuo!e
-
NOTE: On frnnt doors, the inside loct< Ing ro4
can he detached froni the lack after tIre lock
is rctttovsd from the door,
6 'ic I':stali reverse retnroval praeedote, Check
aperatioti at door lock using doer outside nanele
and inside rentare control handLe, Seal door inner
panel, See !otc IS.
NOTE:
not attempt to
lock lift bolt in ''up'' position.
Free Wheeling Mechanism
S_ia
I.
?tli
rear door iutsrtle safety locking rod knob
st the 'cp'' position,
2. Insert adjusting tool through the lack boit
slot, with the bolt at the hottotn of the slot, and
engage trip levem.
NOTE; The tool required ta Feriorm the ad
jutstrnent con be made fto,rr a piece ofwire seven
ittcitoa in length, appmnxitr,amelv I /' indianneter,
wimlt
0
ig.t angle book 3/8'' long at one end.
3. 'L'a edj Os lock ''in'' free-wheeling, aug age-trip
lover and push lever forward, Vig. 3-28.
4. To adjust lock from free -wheeling ma normal,
puL L lever rearward. Fig. 3-29.
30 Front Door Ventilator Assembly
Adjustments
a.
WInS Assembly AdiustmeM 6267
I. l'o adjosm mIre eift,rt mequ:med to rotate ttre'.vrng
asaannbly, looeen nt tigltton screw''C]''. Fig. 3-Ml,
oturil dasired tensint, is obtained.
2. Tn adost the aseernbly in or out, rettuovs the
gatoish molding, door trittt pad, and loosen two
bolts and adiostit';g stud nuts. Fig. 3-31. Turn
sruds in ot
00:
witit a screwdriver to obtain deeired
alignment.
3. With tiuo attaching bolts loose
*
the complete
as seIrthi uro y be tilted fore or a it,
Fig. 3-19 Adjating Reo, Door Lock Out of Fuse Whaaling
29 Adjustment of Rear Door Lock
close doom eith
f;g. 2-28 Adiosting Ream Door Lack a Free Wheeling