STEREO HI-FI SYSTEM With CD PLAYER And AM/FM PLL SYNTHESIZED TUNER RCD641 OWNER’S MANUAL Table of Contents PRECAUTIONS ----------------------------------------------------------------------------------------- IMPORTANT SAFETY INSTRUCTION ------------------------------------------------------------ WARNING ----------------------------------------------------------------------------------------------- INSTALLATION ----------------------------------------------------------------------------------------- OPERATING ELEMENTS --------------------------------------------------------------------------- SETTING UP AND CONNECTING THE STEREO SYSTEM -------------------------------- CLOCK AND TIMER...
PRECAUTIONS Please take good note of the following instruction: The unit must be connected to the Avoid strong magnetic fields, e.g. power voltage, which is the same as near TVs or speakers for other the local area. If not, there is a danger units.
Page 3
14. Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power line surges.
WARNING Read the instruction manual before you attempt to use the unit. Handle glass panels with care. Consult your dealer or service personnel if you have questions about the installation, operation or safety of the unit. Make sure unit is plugged into an 110V-127V outlet. Using higher voltage outlets could cause the unit to malfunction or catch fire.
CLOCK AND TIMER CLOCK While unit is off (still plugged in), press CLOCK ADJ. (42) once. Hour digits will flash. Press /SEARCH (12,36) and SEARCH (14,27) to select correct hour. Press CLOCK ADJ. (42) again. Minute’s digits will flash. Press /SEARCH (12,36) and SEARCH (14,27) to select correct minutes.
programmed. Press PROGRAM (47) when you have reached the desired song. The track will be stored in PROGRAM. Repeat steps to program additional tracks. When programming is complete, press PLAY/PAUSE (9,28) to play the programmed track list. To review programmed tracks, presses PROGRAM (47) repeatedly. Press STOP to clear programmed tracks.