Capacities - New Holland T8.295 Service Manual

Table of Contents

Advertisement

Capacities

T8.295
T8.325
T8.355
T8.385
System
Engine lubrication – with filter
Cooling system
Transmission
Front axle – central reservoir
Front axle – final drives (hubs)
Class 4.75
Class 5.0
Fuel tank – main (*)
Fuel tank – auxiliary (*)
Grease fittings
Air conditioning – refrigerant
gas
Air conditioning – compressor
lubricant
(*) Theoretical fuel tank volume. Use only as a reference for the net volume of the tank.
NOTE: To avoid damage to your machine, always use the same type of coolant. When you top up, use pure water.
If you change the additive used, clean the cooling system first.
NOTE: Always check that the implement does not use more oil than is available in the tractor. The transmission
should have at least the minimum oil level in order to operate.
The correct engine oil viscosity grade is dependent upon ambient temperature. See the table below for the recom-
mended viscosity at different ambient air temperature ranges.
-40 °C
-30 °C
-40 °F
-22 °F
In environments with extreme air temperatures that require long periods of use of the machine, use SAE 50 oil for
extremely high temperatures and SAE 5W30 for extremely low temperatures.
Quantity
25.0 L (6.6 US gal)
27.0 L (7.1 US gal)
172.0 L (45.4 US gal)
17.5 L (4.6 US gal)
4.3 L (1.1 US gal)
4.5 L (1.2 US gal)
359.6 L (79.1 UK gal)
445.0 L (117.6 US gal)
As required
2100 g
285 mL
SAE 5W30
SAE 10W - 30
-25 °C
-15 °C
(-13 °F)
(5 °F)
INTRODUCTION
LA
LA
LA
LA
Recommended fluid
NEW HOLLAND AMBRA
MASTERGOLD™ HSP ENGINE
OIL SAE 15W-40
50% of water and 50% of
NEW HOLLAND AMBRA
ACTIFULL™ OT EXTENDED
LIFE COOLANT
NEW HOLLAND AMBRA
MASTERTRAN® ULTRACTION
NEW HOLLAND AMBRA
HYPOIDE 140
Petroleum diesel fuel (B7
NEW HOLLAND AMBRA GR-9
MULTI-PURPOSE GREASE
CNH R
EFRIGERANT
S
ANDEN
SAE 15W-40
0 °C
10 °C
20 °C
32 °F
50 °F
68 °F
47681318 16/05/2017
35
ACEA E7 API CI-4
SAE 10W-30, API
Biodiesel)
HFC-134
A
SP-15 L
UBRICANT
30 °C
40 °C
86 °F
104 °F
International
specification
CES 20078
ASTM D 6210
– Monoethylene
glycol
SAE 10W-30 API
GL-4
GL-4
-
NLGI 2
-
-
50 °C
122 °F

Advertisement

Table of Contents
loading

This manual is also suitable for:

T8.325T8.355T8.385

Table of Contents