Table of Contents
Advertisement
-
As soon as the display switches off in step 5 you need to press the key (in
this example: the "mono/stereo" key) on your original remote within 10 sec-
onds. If no key is pressed while in learning mode, the remote will return to
user mode after 30 seconds.
-
During learning, keys such as (TV) menu, (VCR) menu etc. will not change
screen when pressed.
-
If you learn a function on a key, the original KAMELEON 6 function auto-
matically becomes shifted. Press the MAGIC key then the key to access it
(this excludes the POWER, Channel and Volume keys). If you learned on a
digit key, access the original function by pressing magic twice and then the
digit.
-
If you want to learn a function on a key that is not in the main screen, use
the SCROLL key to change the screen.
-
The learning feature is mode specific. Therefore you can place one learned
function per mode on the same key.
-
The KAMELEON 6 can learn approximately 30 functions. The amount of keys
depends on the other programmed functions and on the remote to be
learned from.
-
You can replace a learned function by placing another learned function on
top.
-
Please make sure not to use the learning procedure when in direct sunlight
or under incandescent lights.
-
Make sure you are using new batteries before following the learning
instructions above.
-
Upon changing the batteries, your learned functions will be retained.
Shifted Learning
It is also possible to place a function shifted on a key to maintain the original
function.
Example: to place the mono/stereo function shifted on the "red" key.
To place the (e.g. mono/stereo) function shifted on the red key, simply follow
steps 1-8 on page 13, only press "MAGIC" then the "red" key (instead ofhen2learningsu
14
WWW.ONEFORALL.COM
Advertisement
Table of Contents
