Craftsman 486.242221 Owner's Manual page 9

STEP 16 - ATTACH BAG BOTTOM
• Insert the bag frame strap into the stitched sleeve at
the front edge of the bag bottom. See figure 14.
BAG FRAME STRAP
STITCHED
SLEEVE
FIGURE 14
• Assemble the bag frame strap to the holes in the
lower hopper tubes using two clevis pins (O) and hair
cotter pins (S). See figure 15.
BAG FRAME STRAP
CLEVIS PIN (O)
FIGURE 15
HAIR COTTER
PIN (S)
• Fold the bag flaps around the lower hopper tubes and
attach to the bag bottom using the snaps. See figure
16.
SNAP
FIGURE 16
STEP 17 - ASSEMBLE HOPPER CLAMPS
• Assemble two hopper mount clamps (T) over the hole
in the middle of each upper hopper tube using two
carriage bolts (F) and two nylock nuts (I). Tighten only
finger tight. See figure 17.
5/16" x 3/4"
CARRIAGE
BOLT (F)
HOPPER
MOUNT
CLAMP (T)
UPPER
HOPPER
TUBE
FIGURE 17
9
FLAP
5/16" NYLOCK
NUT (I)