Combinations Of Effects; Activating The Effects - Philips IS 5022 PROFESSIONAL Mark II Instruction Manual

The following is a general description of how an effect is activated and
adjusted. (Specific descriptions for each effect are given in the following
sections of this chapter.)
1. Press the
SELECT
The current setting for the effect is indicated on the LED bar.
2. Obtain the required setting by listening carefully and pressing the +
buttons. The
and -
ADJUST
making an adjustment means the effect
buttons are
ADJUST
onds and the effect is
3. To hear the influence of
on/off
while the LED is flashing.
toggle it
is toggled while no LED is flashing, all the activated effects will be
toggled on/off.)
4. When the effect is satisfactory, do n o t
six seconds and the effect is activated. This is indicated by the LED
stopping flashing and remaining on. The
the audio level.
2.1
COMBINATIONS OF
The Sound Enhancer is able to perform either:
and/or
scratch
m noise
m™ compress/expand.
Bass, treble, spatial and fade
figure
(refer to 5.1).
2.2
ACTIVATING
THE
This section describes how to activate the different effects.
@ SCRA TCH
@ NOISE FIL TER
@ STEREO ENHANCEMENT @ SPATIAL
5.1: Valid combinations of effects
Figure
2.2.1 Scratch, noise filter, stereo enhancement
functions
Note: These
To activate either scratch, noise
1. Repeatedly press either of the
required effect
(scratch/noise
compress/expand effect was active, it will be automatically
de-activated.)
button until the
LED of the required
bar will show the setting. The act of
LED
touched, the LED stops
n o t
activated.
n o t
the effect, use the
EFFECTS
filter and/or
stereo enhancement; or
be used with any of these effects
(time) can
EFFECTS
@ BASS @ SCRA TCH
@ @ NOISE FIL TER
TREBLE
fop|
@
cannot be used while compress/expand is active.
filter or
stereo enhancement.
SELECT
filter/stereo
effect flashes.
will
be activated. If the
flashing after six
ON/OFF button
EFFECT
the EFFECT ON/OFF button
(If
touch the ADJUST buttons for
bar reverts to displaying
LED
@ BASS
@ TREBLE
STEREO ENHANCEMENT © SPATIAL
buttons until the
LED
flashes.
e n h a n c e m e n t )
sec‑
to
of the
the
(If