Neilsen CT2378 Instruction Manual
  1. Manuals
  2. Brands
  3. Neilsen Manuals
  4. Measuring Instruments
  5. CT2378
  6. Instruction manual

Neilsen CT2378 Instruction Manual

6" /150mm electronic digital caliper
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
6" /150MM ELECTRONIC DIGITAL CALIPER
CT2378
INSTRUCTION MANUAL
IMPORTANT:
These instructions accompanying the product are the original instructions. This
document is part of the product, keep it for the life of the product passing it on to
any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
Cannon Tools Limited
Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.

Advertisement

Table of Contents
loading

Summary of Contents for Neilsen CT2378

  • Page 1 6" /150MM ELECTRONIC DIGITAL CALIPER CT2378 INSTRUCTION MANUAL IMPORTANT: These instructions accompanying the product are the original instructions. This document is part of the product, keep it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before assembling, operating or maintaining this product.

  • Page 3: Ec Declaration Of Conformity

    In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. Product description: 6"/150MM ELECTRONIC DIGITAL CALIPER Model: CT2378 Applicable EC Directives: EC Directive of Electromagnetic Compatibility 2014/30/EU Harmonized standards EN 61326-1:2013 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.

  • Page 4: Specification

    1. SPECIFICATION Resolution : 0.01mm or 0.0005” Maximum measuring speed: 1.5m/sec or 60”/sec Measuring system: Linear capacitive measuring system Display: LCD display Battery : 1.5V DC LR44 button battery x 2 Operating temperature: C ~ 40 Storage temperature: C ~70 Influence of humidity: not important within 0 to 80% of relative humidity IMPORTANT SAFETY INFORMATION...

  • Page 5: Technical Description

    3. TECHNICAL DESCRIPTION ○ 错误 错误 ○ ○ ○ ○ ○ ○ ○ ○ ○ 1.Internal Measuring Jaws 2.Conversion Switch 3.Slider Clamp Screw 4.LCD Display 5.Step Measuring Jaws 6.External Measuring Jaws 7.ON/OFF Switch 8.Zero Switch 9.Battery Compartment 10.Thumb Roller 11.SEA & Metric 12.Depth Blade 4.

  • Page 6: Using The Tool

    USING THE TOOL ● PREPARATIONS: 1.Slider can be removed only after the locking screw is loosened. 2.Wipe clean all the measuring faces and caliper bar. No organic solutions are allowed. 3.Check to see if all the buttons,switches,and LCD display respond well. ●...

  • Page 7: Battery Replacement

    BATTERY REPLACEMENT Flashing of digits shows a flat battery.Take off the battery cover in the direction shown by the arrow and replace the battery (positive side facing out). ● BATTERY REPLACEMENT Take off the battery cover in the direction shown by the arrow and replace the battery (positive side facing out).

  • Page 8: Explanation Of Symbols

    8. EXPLANATION OF SYMBOLS In accordance with essential safety standards of applicable European directives First read the instruction manual. CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in China...

Table of Contents