Table of Contents
Advertisement
Replacement of batteries in remote controller
1. Press the mark "
fingers as shown in the fig, and then remove the batteries box cover along the arrow
direction.
2. Replace with two #7 (AAA 1.5V) dry batteries.
Make sure positions for "+" pole and "-" pole are
correct.
3. Reinstall batteries box cover.
NOTICE
● The distance between signal sender and receiving window should be no more
than 8m, and there should be no obstacles between them.
●
conditioner when using the remote controller.
● Replace new batteries of the same model when replacement is required.
● When you don't use remote controller for a long time, please take out the
batteries.
" on back cover of batteries box cover for remote controller with
- 17 -
Battery
Reinstall
Cover of battery box
Remove
Advertisement
Table of Contents
